Samsung laptop showing boot menu
how to boot from USB drive in samsung laptopSolving Potential ProblemsAlas, the boot process from a USB flash drive on an ASUS laptop is far from always successful. Let’s analyze the most common problems. Show
BIOS does not see the USB flash drivePerhaps the most common problem with booting from a USB drive. We already have an article about this problem and its solutions, so first of all we recommend that you be guided by it. However, on some laptop models (for example, ASUS X55A) there are settings in the BIOS that need to be disabled. This is done like this.
The second reason for the problem is typical for flash drives with recorded Windows 7. this is an incorrect partitioning scheme. For a long time, the MBR format was the main one, but with the release of Windows 8, GPT took the dominant position. To deal with the problem, overwrite your flash drive with the Rufus program, choosing in the “Scheme and type of system interface” option “MBR for computers with BIOS or UEFI”, and set the file system to “FAT32”. The third reason is problems with the USB port or the flash drive itself. Check the connector first. connect the drive to a different port. If the problem is observed, check the USB flash drive by inserting it into a known working connector on another device. Booting from a USB flash drive on ASUS laptopsASUS notebooks have gained popularity for their quality and reliability. Devices from this manufacturer, like many others, support booting from external media such as flash drives. Today we will consider this procedure in detail with you, as well as get acquainted with possible problems and their solutions. Booting ASUS laptops from a USB stickIn general terms, the algorithm repeats the method identical for all, but there are also several nuances, which we will get acquainted with further.
Read more: Instructions for creating a multi-boot USB and bootable USB flash drive with Windows and Ubuntu Please note that at this stage, the problems described below in the corresponding section of the article most often occur.! Read more: BIOS setup on ASUS notebooks In case there are problems, read below. Touchpad and keyboard do not work during boot from a flash driveThis is an uncommon problem in most recent laptops. Its solution is absurdly simple. connect external control devices to free USB connectors. As a result, we note that in most cases, the boot process from flash drives on ASUS laptops runs smoothly, and the problems mentioned above are rather an exception to the rule. Boot from USB without entering BIOS (Windows 8, 8.1 and Windows 10 with UEFI only)If your computer has one of the latest versions of Windows installed, and the motherboard has UEFI software, then you can boot from a USB flash drive without even entering the BIOS settings. To do this: go to settings. change computer settings (through the panel on the right in Windows 8 and 8.1), then open “Update and Recovery”. “Recovery” and click the “Restart” button in the “Special boot options”. On the Select Action screen that appears, select Use Device. USB device, network connection or DVD “. On the next screen, you will see a list of devices from which you can boot, among which there should be your flash drive. If suddenly it is not there. click “View other devices”. After selection, the computer will reboot from the USB drive you specified. Configuring boot from external media in H2O BIOSTo boot from a USB flash drive into the InsydeH20 BIOS, which is found on many laptops, in the main menu, use the “right” key to go to the “Boot” item. Set External Device Boot to Enabled. Below, in the Boot Priority section, use the F5 and F6 keys to set the External Device to the first position. If you need to boot from DVD or CD, select Internal Optic Disc Drive. Then go to Exit in the top menu and select “Save and Exit Setup”. The computer will reboot from the correct media. Configuring boot from a flash drive in AMI BIOSPlease note that in order to perform all the described actions, the flash drive must be connected to the computer in advance, before entering the BIOS. To set boot from a USB flash drive to AMI BIOS:
If you need to boot from a CD, then we indicate the DVD-ROM drive. Press Esc, in the menu above from the Boot item, move to the Exit item and select “Save changes and exit” or “Exit saving changes”. when asked if you are sure that you want to save the changes made, you will need to select Yes or type “Y” from the keyboard, then press Enter. After that, the computer will reboot and start using the flash drive, disk or other device of your choice for loading. How to get into BIOS to select boot optionsIn different cases, in order to get into the BIOS setup utility, you need to perform, in fact, the same action: immediately after turning on the computer, when the first black screen appears with information about the installed memory or the logo of the computer or motherboard manufacturer, press the desired a button on the keyboard. the most common options are Delete and F2. Press Del key to enter BIOS Usually, this information is located at the bottom of the initial screen: “Press Del to enter Setup”, “Press F2 for Settings” and similar. By pressing the right button at the right moment (the sooner, the better. this must be done before starting the operating system), you will be taken to the settings menu. BIOS Setup Utility. The appearance of this menu may differ, let’s look at a few of the most common options. Booting from a USB flash drive to BIOS AWARD or PhoenixIn order to select a device to boot into the Award BIOS, in the main settings menu, select “Advanced BIOS Features”, then with the First Boot Device selected, press Enter. A list of devices from which you can boot will appear. HDD-0, HDD-1, etc., CD-ROM, USB-HDD and others. To boot from a USB flash drive, you need to install a USB-HDD or USB-Flash. For booting from a DVD or CD. CD. ROM. After that, go up one level by pressing Esc, and select the “Save Exit Setup” menu item. Booting from a USB flash drive to BIOSWhen installing Windows from a USB flash drive, you need to boot the computer from a CD, and in many other cases, you need to configure the BIOS so that the computer boots from the desired media. This article will discuss how to set boot from a USB flash drive to BIOS. Also useful: How to put boot from DVD and CD in BIOS. Update 2016: The guide added ways to put boot from USB to UEFI and BIOS on new computers with Windows 8, 8.1 (which will work for Windows 10 as well). In addition, two methods have been added to boot from a USB drive without changing the BIOS settings. Options for changing the order of boot devices for older motherboards are also present in the instructions. And one more important point: if booting from a USB flash drive on a computer with UEFI does not work, try disabling Secure Boot. See also How to disable talkback on honor Note: The end also describes what to do if you are unable to enter BIOS or UEFI software on modern PCs and laptops. To learn how to create bootable USB sticks, you can read about Honor here: Changing boot order in UEFI BIOSOn modern motherboards, the BIOS interface, or more precisely, the UEFI software, is usually graphical and, perhaps, more understandable in terms of changing the order of boot devices. In most variants, for example, on Gigabyte (not all) or Asus motherboards, you can change the boot order by simply dragging and dropping the disk images with the mouse. If this is not possible, look in the BIOS Features section, in the Boot Options item (the last item may be located in a different place, but the boot order is set there). Using the Boot Menu to boot from a USB flash driveIn most cases, installing a boot from a USB flash drive in the BIOS is required for some one-time task: installing Windows, checking the computer for viruses using the LiveCD, resetting the Windows password. In all these cases, it is not necessary to change the BIOS or UEFI settings, it is enough to call the Boot Menu (boot menu) when you turn on the computer and once select the USB flash drive as the boot device. For example, when installing Windows, you press the desired key, select the connected USB drive with the system distribution kit, start the installation. configuration, copying files, etc., and after the first reboot, the computer will boot itself from the hard drive and continue the installation process as usual. mode. I wrote in great detail about entering this menu on laptops and computers of various brands in the article How to enter the Boot Menu (there is also a video instruction there). How to enable boot from a USB flash drive in BIOS on an Asus laptopThere are two ways to boot from a USB flash drive on an Asus laptop:
Before booting from USB, the user needs to create a bootable disk. For this it is recommended to use the UltraISO program. The estimated amount of internal memory of a portable drive for a successful OS boot must be at least 4 GB, and the file system must be FAT32. If initially the flash drive has NTFS format, then it must be formatted. Right-click on the USB drive icon and select the “Format” line. Normal BIOS setupAfter loading the operating system and writing it to a USB flash drive as a boot disk, you need to go to BIOS. Instructions for switching to BIOS on an Asus laptop:
Navigation through the BIOS is carried out using the arrows on the keyboard panel. To accept values, use the Enter key, and to return them back. ESC. On an Asus laptop, you can set the BIOS to boot from a USB flash drive as follows:
If you are using an old BIOS version (BIOS Award), then it is recommended to do the following to start:
If you come across the BIOS version H2Insyde20, then the instructions for Asus are as follows:
Note! The Intel CoffeeLake processor line does not support the Launch CSM feature, so the value will always remain off. In this case, you will have to use EZ Boot Mode. Setting up the graphical uefi BIOS BIOS utility ez modeTo successfully boot from a USB flash drive, on an Asus laptop via EZ Mode, you need to do the following:
After restarting your Asus computer, downloading data from USB will start. The process can take from a few seconds to 3-4 minutes. Why does not he see the bootable USB flash drive and what to doIf the system does not see the bootable USB flash drive, then the problem may be as follows:
It is recommended to use the Rufus software to correctly record the USB stick. It allows you to select the partition scheme and interface type for different motherboards.
The BIOS may not see USB if the drive is being used in a USB 3.0 port. A more proven option is to use an older USB 2.0 port. The rest of the problems should not arise during the download, especially if you strictly followed our instructions. Booting from a USB flash drive to BIOS: step by step instructionsSo, to put a boot from a USB flash drive in the BIOS on a laptop, you need:
Do not forget that in BIOS we can navigate through sections, tabs and lines only by using the buttons on the keyboard. The mouse won’t help you. However, the BIOS versions are different for all manufacturers and laptop models. Therefore, the above procedure is not suitable for all devices. For example, if you go into BIOS and see a similar interface, then you have Award BIOS. Then it’s best to start a bootable USB flash drive like this:
See also How to check the battery on your Samsung There are also other versions of the BIOS. These are both Phoenix-Award BIOS and AMI BIOS. True, they are all found only on old laptops with not the most recent motherboards. How to configure booting from a USB flash drive for such devices? All the same. Only the names of the sections and BIOS menu items differ. The algorithm of actions and settings is as similar as possible. For reference! As we have already noted, in order to install a boot from a USB flash drive in the BIOS, you need to disable the Secure Boot protocol. That being said, on many lenovo laptops, this is not enough. You may also need to enable compatibility mode. It is called differently. Therefore, look for CSM / CSM Boot, UEFI and Legacy OS, Legacy BIOS, Legacy Support, etc. How else can you boot from a USB flash drive on a laptop?Using a computer BIOS is not the only option. For example, it is possible to boot from a USB flash drive on a laptop asus, toshiba, Samsung, etc. and through a special boot menu. It is called the Boot Menu (by the way, it is also part of the BIOS). You can enter it during the initial download phase. You just need to press Esc, F8, F11 or F12 quite often. Which key exactly depends on the motherboard developer and the BIOS version used in it. Once in the Boot Menu, you need to select and install the boot from the USB flash drive using the arrows on the keyboard. Then all you have to do is press Enter. Agree, it’s quite convenient and simple. However, it is not always possible to enter the boot menu. The fact is that on some laptop models the Boot Menu option is deactivated in the BIOS. Therefore, additional steps are required to enable it.
How to boot a laptop from a USB flash drive via UEFI?Many modern computing devices (especially those with the latest versions of Windows) come with a new bootstrap interface. It is called UEFI. Working with this “variant” of BIOS is a little easier. Plus, you can use the mouse here. However, despite the fact that the new interface is more understandable, not all users know how to work with it. Therefore, we will briefly describe the entire procedure. For example, to boot from a USB flash drive on an HP laptop to UEFI, you need to:
However, there are also quite a few UEFI versions. There are also Russified versions. As a rule, it is even easier to set the boot from a USB flash drive here:
We will also talk about how to boot from a flash drive on devices with Gigabyte motherboards (they are preferred by many popular manufacturers. Acer, Lenovo, Samsung, etc.), on which UEFI BIOS is quite common.
How to boot a laptop from a USB flash driveQuite often, laptop owners or users have to boot into the BIOS from a USB flash drive. Especially if the device does not have a CD / DVD drive, but you need to install a new operating system (OS) or install fresh drivers and antivirus software. Therefore, in this article, we will tell you in detail how to set boot from a USB flash drive to BIOS on laptops of various manufacturers (HP, MSI, sony, dell, acer, etc.). Possible problemsAt first glance, booting a laptop from a USB stick is not difficult. However, there can always be some problems. Therefore, we decided to describe the most frequent ones. In addition, we will tell you how to eliminate them.
Please note that very old laptops may not be able to boot from USB sticks at all. Then you need to either upgrade the device by installing a new motherboard and software, or think about purchasing a new computer. Stage 2: BIOS launchIf you did everything correctly, then you will see the system boot menu, in which you should click on the “Diagnostics” item. Then click on “Additional parameters”. And then. on “UEFI Firmware Options” Go to the final launch phase. click “Restart”. The screen will turn off and after a short (or maybe a long) time you will see the BIOS screen: Stage 1: how to enter the boot menuThere are two radically different ways. The first is with a specially performed laptop reboot. This is the recommended way. Extreme methodI have applied this method once, when my laptop crashed severely after updating one of the applications. The laptop hung at the start and did not want to display an authorization window. Hence, I could not login to the system to do a reboot with special parameters. I needed to do this to restore the system, but if you have the same problem, help you enter the BIOS. I warn you! It is possible to use this method only as a last resort, when there are no other ways. This is done like this (I performed these steps on a Samsung product):
How to enter BIOS in a Samsung laptop and how to update itThe new generation of UEFI systems that have replaced BIOS has made it difficult to penetrate the holy of holies on laptops. Gone are the days in which every user could easily get there by restarting the computer and pressing the Delete button. Or, if this did not help, press some other keys from the functional group. F6. F8 or others. See also How many SIM cards are in Samsung Galaxy This article will discuss how to enter the BIOS on modern PCs or laptops with modern operating systems such as Windows 8 or Windows 10. It looks like you are already desperate, asking yourself the question. is this even possible on your laptop? Maybe you don‘t have any BIOS either? Do not be afraid! Now you can easily and simply follow the necessary steps. We will do this using the example of a Samsung NP350V5C laptop with Windows 8 installed on it. We will also look at how you can update the BIOS, and at the end of the article there is a video on how to configure it before installing Windows 7 or 8. Let’s divide the BIOS startup process into 2 stages. So let’s go Correct reboot optionJust slide your mouse vertically along the right edge of the screen until a pop-up menu appears. You can also call it using the keyboard by pressing Win C. Next, click on “Settings”, then “Change computer settings.” Then press “Update and Restore”. Far away, the manufacturer dragged this option! Now we press “Restore” and here it is. the coveted item “Special boot options”. we press on “Restart now”. Your Samsung (or whatever you have) will dutifully reboot and appear in the boot menu. BIOS updateIt is strongly recommended to update the BIOS only from the official websites of the manufacturers. In my case, in the browser I need to go to the Samsung website and enter the full model name (written on the bottom of the laptop case): NP350V5C-S1JRU After pressing the Enter button, a list appears in which we select an item from the category “Firmware” Next, scroll down the screen and find “Update Software”, click on it, which leads to the download of the BIOSUpdate.exe file Since I downloaded it from the official Samsung website, I can safely launch it and update the BIOS of the laptop: In my case, the latest update has already been installed. If you have a new version available, you just have to press the last button to update the BIOS. How to configure BIOS to boot from disk or flash driveHow to enter BIOS or UEFI, change the priority of boot devices, operating modes of the SATA controller (AHCI and IDE), boot using the Boot Menu to install Windows. In the last article, we talked about how to make a bootable disk or USB flash drive. And now I will tell you how to configure the BIOS of a computer to install Windows from a disk or flash drive. 3.3. Cancel settingsIf you have changed something by accident or are not sure if the settings you made are correct, go to the Exit tab and select Exit and Discard Changes, or press Esc until you see the message to exit without change settings and confirm the action (“OK” or “Yes”). 3.4. Restore settingsTo restore all settings to the optimal default values, go to the Exit tab and select Load Setup Default. After that, you can immediately change other settings or just exit the BIOS with saving the parameters (“Exit and Save Changes” or “F10”). What is BIOS and UEFIEach motherboard has a special program to boot the computer and configure the parameters of various devices. This program is stitched (programmed) into a special microcircuit on the motherboard and is therefore called firmware. Previously, all motherboards had a firmware called BIOS, which had a simple graphical interface with white letters on a blue background and was limited in functionality. For example, in the BIOS it was impossible to use a mouse, choose a language, and there were no graphic elements (pictures) due to the limited size of the BIOS memory chip. Also, motherboards with BIOS did not support drives larger than 2TB due to limitations of the old disk partitioning system (MBR). Now many motherboards have a new type of firmware called UEFI, which features an improved graphical interface with a beautiful background, hand-drawn buttons, the ability to select a language (including Russian) and some improvements. For example, support for a new type of disk partitions (GPT), which allows the use of hard drives larger than 2 TB. You can find out what type of firmware your motherboard has in the manual for it, on the website of the manufacturer of the motherboard or laptop, and also visually when entering the Setup program. The Setup program is also stitched into the motherboard and is used to change BIOS or UEFI settings. How to enter BIOS SetupTo enter the Setup program, immediately after turning on the computer, hold down the “Delete” button on the keyboard. On some motherboards and laptops, this is done using the F2, F10, or Esc keys. Which button to press can be read in the messages that appear immediately after turning on the computer. If you do not have time to read, then press the “Pause” button on the keyboard to pause the download. You can continue downloading by pressing any key. If you press the key intended to enter Setup, you will immediately be taken to the motherboard setup program. Boot problemsFriends, due to the fact that many had problems with booting when installing Windows and some wrote about it in the comments, I decided to make a separate section where I collected the ways I know how to solve these problems.
|